? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macomtech.com for additi onal data sheets and prod uct information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 1 ultra linear driver amplifier - 2 watts 1800 to 2000 mhz rev. v1 PA1132 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. features ? low noise figure: 2.3 db (typ.) ? gain: 21.3 db (typ.) ? high p1db: +33.5 dbm (typ.) ? high ip 3 : +49 dbm (typ.) ? broadband response: 1.5 ghz to 2.2 ghz (typ.) description the PA1132 is a discrete hybrid linear power amplifier design, which uses thick film solder manufacturing processes for accurate performance and high reliability. this 2 stage gaas fet transistor design uses feedback loops for flat broadband linear performance, with very low noise figure. the model is particularly suited for power driver applications used in the base station & repeater infrastructure, and for commercial & military radios. electrical specifications: z 0 = 50 ? , v cc = +12 v dc parameter units typical gurarnteed 25oc 0oc to +85oc frequency mhz 1800-2000 1800-2000 small signal gain (min) db 21.3 19.0 gain flatness (max) db + 0.25 + 0.5 noise figure (max) db 2.3 3.0 reverse isolation db 37.0 power output @ 1.0 db comp. (min.) dbm +33.5 +32.0 output ip 3 dbm +49.0 +46.0 vswr input / output (max.) 1.6:1 / 1.8:1 2.0:1 / 2.0:1 dc current @ +12 volts (max.) ma 495 510 product image absolute maximum ratings parameter absolute maximum storage temperature -40oc to +85oc operation base temperature +85oc max. dc voltage +15 vdc max. continuous rf input power +15 dbm ordering information part number package PA1132 flange mount carrier thermal data: v cc = +12 v dc parameter rating thermal resistance jc 22oc/w junction temperature rise above case t jc 51oc
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macomtech.com for additi onal data sheets and prod uct information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 ultra linear driver amplifier - 2 watts 1800 to 2000 mhz rev. v1 PA1132 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. ga in 20.0 21.0 22.0 1.5 1.6 1.7 1.8 1.9 2 2 .1 2.2 frequency - ghz gain - db vswr 1. 0 1. 5 2.0 2.5 1. 5 1. 6 1. 7 1. 8 1. 9 2 2 . 1 2 . 2 frequency - ghz input vswr out put v swr vswr noise figure 2.1 2.3 2.5 1.5 1.6 1.7 1.8 1.9 2.0 2 .1 2 .2 frequency - ghz noise figure - db power outptut* 32.0 33.0 34.0 1.5 1.6 1.7 1.8 1.9 2 2 .1 2.2 frequency ( ghz ) power output - dbm @ 1.0 db gain compression third order intercept point* 46.0 48.0 50 .0 52 .0 1.5 1.6 1.7 1.8 1.9 2 2 .1 2.2 frequency ( ghz ) intercept point - dbm * output pow er = +15 dbm typical performance curves at +25c outline drawing: flange mount carrier * m/a-com std. outline pin# function 1 rf in 2 ground 3 vcc 4 ground 5 rf out 1.70 1.45 1.06 .56 . 08 min. .12 .15 .10 x 45 o (4 corners) .725 .42 .09 .010 typ. .02 typ. .20 typ. .46 .23 pin pin pin pin pin 1 2 3 4 5 ? dimensions are inches + 0.015 unless otherwise specified.
|
